They`re On!!!

[ericd]

i'm gonna have a go at redoing them , lacquer peel and a few bits & pieces, mind you they're not bad for 11 years old.

wheels are 3 piece so gonna take me a wee bit of time and patience

[Fat Audi 80]

Oh - Nice.

Good luck.

[ericd]

forgot to update this with the superL's fitted , so here's a few pics...


tn_DSCF0213.JPG

[ericd]

one more...
N.B.
had to source long (36mm) locking wheel nuts as standard locking bolts are nowhere near long enough to use with these wheels BTDT , took me about a week to find somewhere that could supply a set of M14 x 1.5, L36 locking bolts

tn_DSCF0211.JPG

[AUDI9020V]

wots the smallest size wheel you can use wi porrka calipers

[Corey]

wots the smallest size wheel you can use wi porrka calipers

I regularly fit the 996 caliper within 15" ur wheels. The limitations are disc diameter and offset, shoot me a PM if you want help with a kit

[dan_b]

Ooh, two lovely things there, Alcon calipers and OZ SuperLeggerios - very nice! Where did you get the Alcons from and all that stuff? What disc are you using? Impressive.

[Greg_S]

Looks lovely with those, have you noticed an improvement in handling with the wheels being so much lighter?

[ericd]

Dan,

the Alcon setup came as part of the n300 package, stripped,cleaned and rebuilt them this year as they were showing their age , disc size is 330mm, only 4 pot calipers but still pretty effective , though trying to source info/spares through Alcon is a nightmare unless you run your own racing team...

Greg,

I've noticed a slight difference over the original Oettinger/oz 3 piece rim, slightly smoother, maybe a little quieter and at least 3kg/wheel lighter

[Greg_S]

do you know how much they weigh with tyres fitted?

[ericd]

I know without the tyre they were < 8.5kg